
Sika® Level-125
Polymer-Modified and Sika® ViscoCrete® Improved, Self-Levelling Cementitious Underlayment for Use at 1 to 38 mm (1/25 to 1 1/2 in) Thickness
- Easy and quick to install.
- Zero VOC content and low odour.
- Highly fluid and self-levelling.
- Manual or pumpable application.
- Feather-edging acceptable in pedestrian areas.
- Levels new and renovates old floors.
- Rapid drying, can be walked on after 8 hours at 23°C (73°F).
- Ceramic tiles and natural stone can be installed after 24 hours.
- Floor coverings (carpet, vinyl, PVC, rubber, engineered wood flooring) can be installed after 1 to 3 days.
- Suitable on floors with in-floor radiant heating.
- Excellent underlayment for tiles, sheet products and wood floor bonding systems.

Usage
Interior floor levelling and smoothing applications in pedestrian areas, where floor coverings are to follow, such as:
- Institutional - schools, colleges, hospitals, clinics, libraries, galleries, museums.
- Commercial - offices, corridors, hallways, canteens, cafeterias, stores, hotels, restaurants.
- Residential - domestic properties, condominiums and high rise construction.
Advantages
- Easy and quick to install.
- Zero VOC content and low odour.
- Highly fluid and self-levelling.
- Manual or pumpable application.
- Feather-edging acceptable in pedestrian areas.
- Levels new and renovates old floors.
- Rapid drying, can be walked on after 8 hours at 23°C (73°F).
- Ceramic tiles and natural stone can be installed after 24 hours.
- Floor coverings (carpet, vinyl, PVC, rubber, engineered wood flooring) can be installed after 1 to 3 days.
- Suitable on floors with in-floor radiant heating.
- Excellent underlayment for tiles, sheet products and wood floor bonding systems.
Packaging
22.7 kg (50 lb) bagColour
Concrete GreyFAQ
The Sika® Level-125 CA can be installed over engineer-approved wooden (plywood) subfloors. When installing the underlayment over the wooden subfloors, ensure that the subfloor consists of at least two layers of exterior grade plywood (CANPLY compliant), a minimum of 32mm (1 ¼ in) in thickness and meets, as a minimum, the deflection parameters of L/360. The wood/plywood must be suitably secured, bonded and prepared to a contaminant free and sound condition.
*Do not apply Sika® Level-125 CA onto chipboard, particleboard, hardboard, or any dimensionally unstable substrates.
Ceramic tiles and natural stone may be installed after 24 hours. Carpet, vinyl sheeting, PVC, rubber, and engineered wood plank can be installed after 1-3 days depending upon thickness of underlayment and drying conditions.
All concrete and cement substrates must be primed using Sika® Level-01 PrimerCA, or where concrete/cement and wood substrates exist, Sika® Level-03 PrimerCA may be used.
Sika® Level-125 CA is for interior use only.
Properties at 23 °C (73 °F) and 50 % R.H. (4.1 L water content)
Cannot be overcoated with a resin other than Sika® Primer MBCA
As with all cement-based materials, avoid contact with aluminum to prevent adverse chemical reactions and possible product failure. Insulate potential areas of contact by coating aluminum bars, rail, post with an appropriate epoxy such as Sikadur Hi-Mod 32.